It’s the heat now, is your air conditioner also going on strike? Remember when you last cleaned the air conditioner? In order to cope with this year's hot summer, Xiao Bian now teaches everyone how to clean up the air conditioner comprehensively, and I will do a "health" check for you and your air conditioner.

　　It is not enough to clean the filter only one step at a time. The heat sink cleaning and disinfection is the key. Today, most households still only clean the air conditioners at the filter level. In fact, this does not completely eliminate the pollution caused by air conditioners. Because the filter only filters a portion of the dust, some of the dust still accumulates on the heat sink through the filter and accumulates a large number of germs.

　　After understanding the real cause of air-conditioning pollution, we can do one more step in cleaning the air conditioner every time, clean the filter and clean and disinfect the air-conditioning heat sink, so as to effectively prevent the bacteria growth of the heat sink from polluting the indoor air. .

When it comes to cleaning air conditioners, most of them will be discouraged, but in fact, this is not so difficult. In general, the plot is divided into three steps, so let's talk about it.

1, the air conditioning shell cleaning

　　First, power off the air conditioner! Wipe the dust off the case directly with a damp cloth. When rubbing, try to do it in one direction, rub it from left to right to the edge, then fold the rag, change to the clean side and wipe it again, and then go back and forth several times to make the air conditioner look new.

2, the cleaning of the internal filter

　　Next, open the front panel of the air conditioner. By gently rubbing the sides of the air conditioner case with your hand, the front panel can be easily opened, and the internal filter is presented in front of you. The removal of the filter is also very simple. Find the position of the buckle and remove it by pushing it gently.

　　Next, take the filter directly under the tap and rinse it. In order to improve efficiency, you can also use some small tools, such as a brush or a used toothbrush, which not only speeds up the cleaning, but also provides better cleaning results. After the filter is cleaned, it can be placed on the ground and dried naturally.

3, the cooling fin cleaning

　　The same dirty is the air conditioning radiator fins, but it is not as detachable as the filter, here you need to use a professional tool - air conditioning cleaner. The method of use is also very simple, it can be directly sprayed on the fins, the amount is not too much, and all the fins can be uniformly covered. After spraying, let stand for about ten minutes, then put the filter that has been dried back and fasten the front panel again. Turn on the air conditioning and cooling mode, and adjust the air volume to the maximum. After running for about half an hour, you will see sewage flowing out of the drain pipe.